PartsTable
Technical Data Sheet
Download PDF

ST33D52-8 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ST33D52-8: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: NICKEL ALLOY 718 OVERALL, nut_style: DOUBLE HEXAGON, lubrication: DRY FILM LUBRICANT, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), overall_height: 0.675 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-243-6565, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST33D52-8
NSN: 5310-01-243-6565
FSC: 5310 — Nuts and Washers
CAGE: 04236 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
nut_styleDOUBLE HEXAGON
lubricationDRY FILM LUBRICANT
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.675 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.040 INCHES MINIMUM IN
surface_treatmentCADMIUM OVERALL
width_across_flats0.703 INCHES MINIMUM IN
nominal_thread_size0.500 INCHES IN
NSN5310-01-243-6565
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ST33D52-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WASHER OUTSIDE DIAMETER: 0.950 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.703 INCHES MINIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
WASHER THICKNESS: 0.040 INCHES MINIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
OVERALL HEIGHT0.675 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.950 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.703 INCHES MINIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
WASHER THICKNESS0.040 INCHES MINIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
VN2604YC080Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST33D52-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST33D52-8?
ST33D52-8 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace ST33D52-8?
There is 1 known substitute for ST33D52-8: VN2604YC080. Substitute compatibility should be verified for your specific system.
What is the NSN for ST33D52-8?
ST33D52-8 is cataloged in the U.S. Government catalog under NSN 5310-01-243-6565. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST33D52-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.