PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ST32D19-13
ST32D19-13 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: BLACK, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 0.380 INCHES NOMINAL IN, connection_style: SWIVEL, PLAIN SECOND END, outside_diameter: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-261-1037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST32D19-13
NSN: 4720-01-261-1037
FSC: 4720
CAGE: 04236 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorBLACK
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter0.380 INCHES NOMINAL IN
connection_styleSWIVEL, PLAIN SECOND END
outside_diameter0.750 INCHES NOMINAL IN
special_featuresONE END FITTING FIXED AND OTHER END SWIVEL; FINISH WITH ELECTRODEPOSITED ZINC WITH SUPPLEMENTARY CHROMATE TREATMENT
thread_directionRIGHT-HAND SECOND END
features_providedREUSABLE END FITTINGS
operating_pressure225.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure900.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.375 INCHES FIRST END IN
NSN4720-01-261-1037
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: ST32D19-13 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 0.380 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED TEXTILE YARN AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
NOMINAL THREAD SIZE: 0.375 INCHES SECOND END IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
CONNECTION TYPE: THREADED EXTERNAL PIPE SECOND END
•
BURST TEST PRESSURE: 900.0 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER0.380 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED TEXTILE YARN AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
NOMINAL THREAD SIZE0.375 INCHES SECOND END IN
THREAD DIRECTIONRIGHT-HAND FIRST END
THREAD DIRECTIONRIGHT-HAND SECOND END
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
CONNECTION TYPETHREADED EXTERNAL PIPE SECOND END
BURST TEST PRESSURE900.0 POUNDS PER SQUARE INCH LBS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
END CONNECTION DESIGNSTRAIGHT SECOND END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
ST32D19Interchangeable
interchangeable cross-reference
interchangeable
AD66611Interchangeable
interchangeable cross-reference
interchangeable
ST32D19-6Interchangeable
interchangeable cross-reference
interchangeable
16654Interchangeable
interchangeable cross-reference
interchangeable
62X3536B0Interchangeable
interchangeable cross-reference
interchangeable
ST32D19-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ST32D19-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST32D19-13?
ST32D19-13 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace ST32D19-13?
There are 12 known substitutes for ST32D19-13: ST32D19, AD66611, ST32D19-6 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST32D19-13?
ST32D19-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-261-1037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST32D19-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026