ST2141-05 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

ST2141-05: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT CHAMFER, grip_length: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, head_height: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-316-7091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ST2141-05

NSN: 5320-01-316-7091
FSC: 5320 — Rivets
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)

SPECIFICATIONS

material	TITANIUM ALLOY UNS R56400 OVERALL
head_style	FLAT CHAMFER
grip_length	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
head_height	0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
fastener_length	0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
special_features	SURF TEXTURE PER SPEC PWA 362 WHERE SHOWN:APPL DATA F100PW0229 ENGINE/FAN MODULE
thread_direction	RIGHT-HAND
head_major_diameter	0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
nominal_thread_size	0.164 INCHES IN
NSN	5320-01-316-7091

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 FED SPEC 1ST MATERIAL RESPONSE OR AMS 4967 FED SPEC 2ND MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

•

GRIP LENGTH: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
HEAD HEIGHT	0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
FASTENER LENGTH	0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 FED SPEC 1ST MATERIAL RESPONSE OR AMS 4967 FED SPEC 2ND MATERIAL RESPONSE OVERALL
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
GRIP LENGTH	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.064 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

SUBSTITUTES & CROSS-REFERENCES 1

HL12V-5-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy ST2141-05?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ST2141-05?

ST2141-05 is a PIN-RIVET.

What parts can replace ST2141-05?

There is 1 known substitute for ST2141-05: HL12V-5-5. Substitute compatibility should be verified for your specific system.

What is the NSN for ST2141-05?

ST2141-05 is cataloged in the U.S. Government catalog under NSN 5320-01-316-7091. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ST2141-05 — PIN-RIVET

Request a Quote — ST2141-05