PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ST1039-32
ST1039-32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ASBESTOS CUSHION, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-415-5212, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST1039-32
NSN: 5340-00-415-5212
FSC: 5340
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialASBESTOS CUSHION
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
loop_inside_diameter2.000 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.683 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
NSN5340-00-415-5212
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST1039-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.683 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM IN
MATERIALASBESTOS CUSHION
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END1.683 INCHES MINIMUM AND 1.753 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
311-605Interchangeable
interchangeable cross-reference
interchangeable
62-54-1Interchangeable
interchangeable cross-reference
interchangeable
311-0605-00Interchangeable
interchangeable cross-reference
interchangeable
9994Interchangeable
interchangeable cross-reference
interchangeable
9175813-3Interchangeable
interchangeable cross-reference
interchangeable
P809074Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ST1039-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST1039-32?
ST1039-32 is a CLAMP,LOOP.
What parts can replace ST1039-32?
There are 12 known substitutes for ST1039-32: 311-605, 62-54-1, 311-0605-00 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST1039-32?
ST1039-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-415-5212. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST1039-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026