PartsTable
Technical Data Sheet
Download PDF

ST0510400F11APM — STRAINER,SEDIMENT

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

ST0510400F11APM: STRAINER,SEDIMENT.

The STRAINER,SEDIMENT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, mesh_size: 8.0, body_height: 28.500 INCHES NOMINAL IN, body_length: 22.750 INCHES NOMINAL IN, wire_diameter: 0.375 INCHES NOMINAL IN, style_designator: TWIN STRAINER W/BOLTED COVER. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-194-0287, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST0510400F11APM
NSN: 4730-01-194-0287
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 73124 — HAYWARDINDL. PRODUCTS, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
mesh_size8.0
body_height28.500 INCHES NOMINAL IN
body_length22.750 INCHES NOMINAL IN
wire_diameter0.375 INCHES NOMINAL IN
style_designatorTWIN STRAINER W/BOLTED COVER
filtering_media_designMESH SINGLE FILTERING MEDIA RESPONSE
distance_from_bottom_of_body_to_center_of_inlet16.000 INCHES NOMINAL IN
NSN4730-01-194-0287
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: ST0510400F11APM · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FILTERING MEDIA DESIGN: MESH SINGLE FILTERING MEDIA RESPONSE
•
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET: 16.000 INCHES NOMINAL IN
•
BODY HEIGHT: 28.500 INCHES NOMINAL IN
•
MESH SIZE: 8.0
•
STYLE DESIGNATOR: TWIN STRAINER W/BOLTED COVER
•
BODY LENGTH: 22.750 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY BODY
•
WIRE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FILTERING MEDIA DESIGNMESH SINGLE FILTERING MEDIA RESPONSE
DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET16.000 INCHES NOMINAL IN
BODY HEIGHT28.500 INCHES NOMINAL IN
MESH SIZE8.0
STYLE DESIGNATORTWIN STRAINER W/BOLTED COVER
BODY LENGTH22.750 INCHES NOMINAL IN
MATERIALCOPPER ALLOY BODY
WIRE DIAMETER0.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
50-0400F-11C-MILReference document
Same NSN cross-reference
Reference document — Drawing number reference only
ST50-0400F11C-PM-ST511MHXXReference document
Same NSN cross-reference
Reference document — Secondary reference
50F-B(4)Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ST0510400F11APM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST0510400F11APM?
ST0510400F11APM is a STRAINER,SEDIMENT.
What parts can replace ST0510400F11APM?
There are 3 known substitutes for ST0510400F11APM: 50-0400F-11C-MIL, ST50-0400F11C-PM-ST511MHXX, 50F-B(4). Substitute compatibility should be verified for your specific system.
What is the NSN for ST0510400F11APM?
ST0510400F11APM is cataloged in the U.S. Government catalog under NSN 4730-01-194-0287. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST0510400F11APM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.