PartsTable
Technical Data Sheet
Download PDF

ST-206 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

ST-206: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, closed_length: 22.000 INCHES NOMINAL IN, extended_length: 45.000 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), side_for_which_designed: RIGHT HAND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-554-5968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST-206
NSN: 3110-00-554-5968
NIINs: 005545968, 010967830, 013120362
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
closed_length22.000 INCHES NOMINAL IN
extended_length45.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
side_for_which_designedRIGHT HAND
NSN3110-00-554-5968
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: ST-206 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 90.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH23.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER90.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
END ITEM IDENTIFICATION2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 10
A24501-72Reference document
Same NSN cross-reference
Reference document — Secondary reference
23304Reference document
Same NSN cross-reference
Reference document — Secondary reference
01677771Reference document
Same NSN cross-reference
Reference document — Secondary reference
308MQ6B4Reference document
Same NSN cross-reference
Reference document — Secondary reference
3251Reference document
Same NSN cross-reference
Reference document — Secondary reference
MT308TFReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST-206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST-206?
ST-206 is a BEARING,BALL,ANNULAR.
What parts can replace ST-206?
There are 10 known substitutes for ST-206: A24501-72, 23304, 01677771 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ST-206?
ST-206 is cataloged in the U.S. Government catalog under NSN 3110-00-554-5968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST-206

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.