PartsTable
Technical Data Sheet
Download PDF

ST-1727-0632-41 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ST-1727-0632-41: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, shaft_length: 1.50 INCHES NOMINAL IN, thread_length: 0.375 INCHES NOMINAL IN, major_diameter: 0.375 INCHES NOMINAL IN, overall_length: 1.50 INCHES NOMINAL IN, mounting_method: SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-732-0351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ST-1727-0632-41
NSN: 5340-01-732-0351
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
shaft_length1.50 INCHES NOMINAL IN
thread_length0.375 INCHES NOMINAL IN
major_diameter0.375 INCHES NOMINAL IN
overall_length1.50 INCHES NOMINAL IN
mounting_methodSCREW
handle_clearance1.00 INCHES NOMINAL IN
overall_diameter0.1875 INCHES NOMINAL IN
style_designatorROUND
surface_treatmentUNABLE TO DECODE
integral_shaft_styleROUND
end_item_identification2540-01-695-9131; PUMP STATION
NSN5340-01-732-0351
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ST-1727-0632-41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.375 INCHES NOMINAL IN
•
INTEGRAL SHAFT STYLE: ROUND
•
MOUNTING FACILITY QUANTITY: 2
•
SHAFT ACCOMMODATION STYLE: ROUND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL DIAMETER: 0.1875 INCHES NOMINAL IN
•
MOUNTING FACILITY LENGTH: 0.25 INCHES NOMINAL IN
•
MOUNTING METHOD: SCREW
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.375 INCHES NOMINAL IN
INTEGRAL SHAFT STYLEROUND
MOUNTING FACILITY QUANTITY2
SHAFT ACCOMMODATION STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL DIAMETER0.1875 INCHES NOMINAL IN
MOUNTING FACILITY LENGTH0.25 INCHES NOMINAL IN
MOUNTING METHODSCREW
THREAD LENGTH0.375 INCHES NOMINAL IN
STYLE DESIGNATORROUND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ST-1727-0632-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ST-1727-0632-41?
ST-1727-0632-41 is a HANDLE,BOW.
What is the NSN for ST-1727-0632-41?
ST-1727-0632-41 is cataloged in the U.S. Government catalog under NSN 5340-01-732-0351. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ST-1727-0632-41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.