PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSZ99R8XR1CJ
SSZ99R8XR1CJ ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-245-5205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSZ99R8XR1CJ
NSN: 3110-00-245-5205
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter1.1250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-00-245-5205
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSZ99R8XR1CJ · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SEAL QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SEAL QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
R8FFAND0CCInterchangeable
interchangeable cross-reference
interchangeable
77R8XR1CInterchangeable
interchangeable cross-reference
interchangeable
S5PPF4G90Interchangeable
interchangeable cross-reference
interchangeable
FF-B-2844/05Interchangeable
interchangeable cross-reference
interchangeable
SR33PPDK36-74Interchangeable
interchangeable cross-reference
interchangeable
FFB2844/05AD1XXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSZ99R8XR1CJ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSZ99R8XR1CJ?
SSZ99R8XR1CJ is a BEARING,BALL,ANNULAR.
What parts can replace SSZ99R8XR1CJ?
There are 21 known substitutes for SSZ99R8XR1CJ: R8FFAND0CC, 77R8XR1C, S5PPF4G90 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSZ99R8XR1CJ?
SSZ99R8XR1CJ is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-245-5205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSZ99R8XR1CJ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026