PartsTable
Technical Data Sheet
Download PDF

SSRS77038UZF5FX6 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SSRS77038UZF5FX6: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OVERALL A, bore_shape: STRAIGHT, bore_diameter: 0.3148 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM IN, overall_width: 0.2706 INCHES MINIMUM AND 0.2756 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-043-2458, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSRS77038UZF5FX6
NSN: 3110-01-043-2458
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 440A OVERALL A
bore_shapeSTRAIGHT
bore_diameter0.3148 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM IN
overall_width0.2706 INCHES MINIMUM AND 0.2756 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter0.8659 INCHES MINIMUM AND 0.8661 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-043-2458
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSRS77038UZF5FX6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 0.8659 INCHES MINIMUM AND 0.8661 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.2706 INCHES MINIMUM AND 0.2756 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8659 INCHES MINIMUM AND 0.8661 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 1
207897Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SSRS77038UZF5FX6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSRS77038UZF5FX6?
SSRS77038UZF5FX6 is a BEARING,BALL,ANNULAR.
What parts can replace SSRS77038UZF5FX6?
There is 1 known substitute for SSRS77038UZF5FX6: 207897. Substitute compatibility should be verified for your specific system.
What is the NSN for SSRS77038UZF5FX6?
SSRS77038UZF5FX6 is cataloged in the U.S. Government catalog under NSN 3110-01-043-2458. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSRS77038UZF5FX6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.