PartsTable
Technical Data Sheet
Download PDF

SSRIF-814ZZTA7P58LOU — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SSRIF-814ZZTA7P58LOU: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OUTER RING, bore_shape: STRAIGHT, flange_width: 0.0450 INCHES NOMINAL IN, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1875 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-438-6796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSRIF-814ZZTA7P58LOU
NSN: 3110-00-438-6796
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OUTER RING
bore_shapeSTRAIGHT
flange_width0.0450 INCHES NOMINAL IN
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1875 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresSHIPPED DRY ALSO HEAT STABILIZED FROM MINUS 325 TO PLUS 575 DEG ALSO RETAINER IMPREGNATED WITH MOS2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
flange_outside_diameter0.5470 INCHES NOMINAL IN
NSN3110-00-438-6796
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSRIF-814ZZTA7P58LOU · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MOLDED
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.5470 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMOLDED
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.5470 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1875 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSHIPPED DRY ALSO HEAT STABILIZED FROM MINUS 325 TO PLUS 575 DEG ALSO RETAINER IMPREGNATED WITH MOS2
SUBSTITUTES & CROSS-REFERENCES 5
400-0039-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
SFR188SS5TGReference document
Same NSN cross-reference
Reference document — Secondary reference
M81793-DIHJAA0SCF71AA0Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81793Reference document
Same NSN cross-reference
Reference document — Secondary reference
SFR188SSTBReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SSRIF-814ZZTA7P58LOU?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSRIF-814ZZTA7P58LOU?
SSRIF-814ZZTA7P58LOU is a BEARING,BALL,ANNULAR.
What parts can replace SSRIF-814ZZTA7P58LOU?
There are 5 known substitutes for SSRIF-814ZZTA7P58LOU: 400-0039-001, SFR188SS5TG, M81793-DIHJAA0SCF71AA0 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSRIF-814ZZTA7P58LOU?
SSRIF-814ZZTA7P58LOU is cataloged in the U.S. Government catalog under NSN 3110-00-438-6796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSRIF-814ZZTA7P58LOU

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.