PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSRIF-518HA7P25LO1
SSRIF-518HA7P25LO1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0230 INCHES NOMINAL IN, bore_diameter: 0.1250 INCHES NOMINAL IN, overall_width: 0.1094 INCHES NOMINAL IN, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-202-3773, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSRIF-518HA7P25LO1
NSN: 3110-01-202-3773
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
flange_width0.0230 INCHES NOMINAL IN
bore_diameter0.1250 INCHES NOMINAL IN
overall_width0.1094 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
flange_outside_diameter0.3590 INCHES NOMINAL IN
outer_ring_outside_diameter0.3125 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-01-202-3773
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSRIF-518HA7P25LO1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
SC500-103Interchangeable
interchangeable cross-reference
interchangeable
SFR2-5Interchangeable
interchangeable cross-reference
interchangeable
AVF8K20Interchangeable
interchangeable cross-reference
interchangeable
2304239Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSRIF-518HA7P25LO1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSRIF-518HA7P25LO1?
SSRIF-518HA7P25LO1 is a BEARING,BALL,ANNULAR.
What parts can replace SSRIF-518HA7P25LO1?
There are 4 known substitutes for SSRIF-518HA7P25LO1: SC500-103, SFR2-5, AVF8K20 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSRIF-518HA7P25LO1?
SSRIF-518HA7P25LO1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-202-3773. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSRIF-518HA7P25LO1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026