SSRIF-4HA7P25LY5 — BEARING,BALL,ANNULAR

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

SSRIF-4HA7P25LY5: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0230 INCHES NOMINAL IN, bore_diameter: 0.0781 INCHES NOMINAL IN, overall_width: 0.0937 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-764-9496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SSRIF-4HA7P25LY5

NSN: 3110-00-764-9496
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
bore_shape	STRAIGHT
flange_width	0.0230 INCHES NOMINAL IN
bore_diameter	0.0781 INCHES NOMINAL IN
overall_width	0.0937 INCHES NOMINAL IN
load_direction	RADIAL
surface_finish	GROUND
style_designator	NON-LOADING GROOVE, NON-SEPARABLE
internal_clearance	0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_material	OIL
flange_outside_diameter	0.2960 INCHES NOMINAL IN
outer_ring_outside_diameter	0.2500 INCHES NOMINAL IN
NSN	3110-00-764-9496

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: PRESSED

•

LUBRICATION MATERIAL: OIL

•

INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN

•

FLANGE OUTSIDE DIAMETER: 0.2960 INCHES NOMINAL IN

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE

•

BORE SHAPE: STRAIGHT

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	PRESSED
LUBRICATION MATERIAL	OIL
INTERNAL CLEARANCE	0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER	0.2960 INCHES NOMINAL IN
SURFACE FINISH	GROUND
STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH	0.0937 INCHES NOMINAL IN
BORE SHAPE	STRAIGHT
LOAD DIRECTION	RADIAL
FLANGE WIDTH	0.0230 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 6

1226633-1Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

M81793-DDDCAN0GC71AK1Reference document

Same NSN cross-reference

Reference document — Secondary reference

M81793/08-DA1N2N1K1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

3110PL0138887Reference document

Same NSN cross-reference

Reference document — Informative reference only

MIL-B-81793/8Reference document

Same NSN cross-reference

Reference document — Identification reference

SFR1-4K25-26Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)

Ready to buy SSRIF-4HA7P25LY5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SSRIF-4HA7P25LY5?

SSRIF-4HA7P25LY5 is a BEARING,BALL,ANNULAR.

What parts can replace SSRIF-4HA7P25LY5?

There are 6 known substitutes for SSRIF-4HA7P25LY5: 1226633-1, M81793-DDDCAN0GC71AK1, M81793/08-DA1N2N1K1 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SSRIF-4HA7P25LY5?

SSRIF-4HA7P25LY5 is cataloged in the U.S. Government catalog under NSN 3110-00-764-9496. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SSRIF-4HA7P25LY5 — BEARING,BALL,ANNULAR

Request a Quote — SSRIF-4HA7P25LY5