PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSRI-5632RA5P25LG49
SSRI-5632RA5P25LG49 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, overall_width: 0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-352-2772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSRI-5632RA5P25LG49
NSN: 3110-01-352-2772
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
bore_shapeSTRAIGHT
bore_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
overall_width0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
specification/standard_data05624-A+1-6 MANUFACTURERS SPECIFICATION CONTROL
standard_tolerance_designationABEC NO.3
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-352-2772
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSRI-5632RA5P25LG49 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.3
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
SPECIFICATION/STANDARD DATA: 05624-A+1-6 MANUFACTURERS SPECIFICATION CONTROL
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.3
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA05624-A+1-6 MANUFACTURERS SPECIFICATION CONTROL
OVERALL OUTSIDE DIAMETER0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AP16Interchangeable
interchangeable cross-reference
interchangeable
3231Interchangeable
interchangeable cross-reference
interchangeable
3231AInterchangeable
interchangeable cross-reference
interchangeable
3231-47-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSRI-5632RA5P25LG49?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSRI-5632RA5P25LG49?
SSRI-5632RA5P25LG49 is a BEARING,BALL,ANNULAR.
What parts can replace SSRI-5632RA5P25LG49?
There are 4 known substitutes for SSRI-5632RA5P25LG49: AP16, 3231, 3231A and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSRI-5632RA5P25LG49?
SSRI-5632RA5P25LG49 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-352-2772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSRI-5632RA5P25LG49

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026