PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSR8AGS5J99YH
SSR8AGS5J99YH ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.2500 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-003-6566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSR8AGS5J99YH
NSN: 3110-00-003-6566
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.2500 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0100 INCHES MINIMUM RADIAL AND 0.0150 INCHES MAXIMUM RADIAL IN
overall_outside_diameter1.1250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-003-6566
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSR8AGS5J99YH · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
MATERIAL: STEEL CORROSION RESISTING RETAINER
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL WIDTH0.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.5
MATERIALSTEEL CORROSION RESISTING RETAINER
MATERIALSTEEL COMP 440C INNER RING
MATERIALSTEEL COMP 440C BALL
MATERIALSTEEL COMP 440C OUTER RING
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
3TKR8-18-21Interchangeable
interchangeable cross-reference
interchangeable
SSR8AGS5J99YHInterchangeable
interchangeable cross-reference
interchangeable
358713-1Interchangeable
interchangeable cross-reference
interchangeable
364750-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSR8AGS5J99YH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSR8AGS5J99YH?
SSR8AGS5J99YH is a BEARING,BALL,ANNULAR.
What parts can replace SSR8AGS5J99YH?
There are 4 known substitutes for SSR8AGS5J99YH: 3TKR8-18-21, SSR8AGS5J99YH, 358713-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSR8AGS5J99YH?
SSR8AGS5J99YH is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-003-6566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSR8AGS5J99YH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026