PartsTable
Technical Data Sheet
Download PDF

SSR4ZZHA1P25LY48 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SSR4ZZHA1P25LY48: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OVERALL A, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-041-8172, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSR4ZZHA1P25LY48
NSN: 3110-01-041-8172
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 50294 — NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440A OVERALL A
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresTWO BEARING ASSY PER UNIT SEPARATED BY A CIRCLIP MOUNTED INTO BODY OF POTENTIOMETER
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
end_item_identificationPOTIOMETER ADAPTER ASSEMBLY
NSN3110-01-041-8172
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSR4ZZHA1P25LY48 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.1960 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 3
RCM1/4FZZReference document
Same NSN cross-reference
Reference document — Secondary reference
10107443Reference document
Same NSN cross-reference
Reference document — Informative reference only
SSR-4ZZReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SSR4ZZHA1P25LY48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSR4ZZHA1P25LY48?
SSR4ZZHA1P25LY48 is a BEARING,BALL,ANNULAR.
What parts can replace SSR4ZZHA1P25LY48?
There are 3 known substitutes for SSR4ZZHA1P25LY48: RCM1/4FZZ, 10107443, SSR-4ZZ. Substitute compatibility should be verified for your specific system.
What is the NSN for SSR4ZZHA1P25LY48?
SSR4ZZHA1P25LY48 is cataloged in the U.S. Government catalog under NSN 3110-01-041-8172. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSR4ZZHA1P25LY48