PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSR4DZD1
SSR4DZD1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-702-1107, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSR4DZD1
NSN: 3110-00-702-1107
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.6250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-702-1107
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSR4DZD1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL CORROSION RESISTING OUTER RING
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
MATERIALSTEEL CORROSION RESISTING OUTER RING
MATERIALSTEEL RETAINER
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL CORROSION RESISTING INNER RING
MATERIALSTEEL CORROSION RESISTING BALL
RETAINER FABRICATION METHODPRESSED
OVERALL WIDTH0.1960 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1802-02Interchangeable
interchangeable cross-reference
interchangeable
3M135-3Interchangeable
interchangeable cross-reference
interchangeable
9000S6405-74222REV0PC5Interchangeable
interchangeable cross-reference
interchangeable
M16377/27-002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSR4DZD1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSR4DZD1?
SSR4DZD1 is a BEARING,BALL,ANNULAR.
What parts can replace SSR4DZD1?
There are 4 known substitutes for SSR4DZD1: 1802-02, 3M135-3, 9000S6405-74222REV0PC5 and 1 more. Substitute compatibility should be verified for your specific system.
Is SSR4DZD1 still available?
SSR4DZD1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSR4DZD1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026