SSR1-1812DDR1P58LG54 — BEARING,BALL,ANNULAR

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

SSR1-1812DDR1P58LG54: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A BALL A, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-089-8795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SSR1-1812DDR1P58LG54

NSN: 3110-01-089-8795
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 50294 — NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 440A BALL A
bore_shape	STRAIGHT
bore_diameter	0.5000 INCHES NOMINAL IN
overall_width	0.3125 INCHES NOMINAL IN
seal_quantity	2
load_direction	RADIAL
surface_finish	GROUND
special_features	ELECTRIC MOTOR QUALITY NOISE TEST,VENDORS CERTIFICATION REQUIRED
style_designator	NON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_type	CONTACT
internal_clearance	0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_material	GREASE
NSN	3110-01-089-8795

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: PRESSED

•

BEARING SEAL TYPE: CONTACT

•

LUBRICATION MATERIAL: GREASE

•

INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE

•

MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	PRESSED
BEARING SEAL TYPE	CONTACT
LUBRICATION MATERIAL	GREASE
INTERNAL CLEARANCE	0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISH	GROUND
STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE BALL
OVERALL WIDTH	0.3125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	1.1250 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 6

SR8D1LL5DK58-235Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PAS5PPFS50160Reference document

Same NSN cross-reference

Reference document — Secondary reference

SR8RZZ1P58LY-196Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

613-0015Reference document

Same NSN cross-reference

Reference document — Secondary reference

SR8FFK58G-32Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

APS5KRRReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy SSR1-1812DDR1P58LG54?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SSR1-1812DDR1P58LG54?

SSR1-1812DDR1P58LG54 is a BEARING,BALL,ANNULAR.

What parts can replace SSR1-1812DDR1P58LG54?

There are 6 known substitutes for SSR1-1812DDR1P58LG54: SR8D1LL5DK58-235, PAS5PPFS50160, SR8RZZ1P58LY-196 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SSR1-1812DDR1P58LG54?

SSR1-1812DDR1P58LG54 is cataloged in the U.S. Government catalog under NSN 3110-01-089-8795. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SSR1-1812DDR1P58LG54 — BEARING,BALL,ANNULAR

Request a Quote — SSR1-1812DDR1P58LG54