PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSNR3HL1
SSNR3HL1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0420 INCHES NOMINAL IN, bore_diameter: 0.1875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSNR3HL1
NSN: 3110-00-293-8392
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
flange_width0.0420 INCHES NOMINAL IN
bore_diameter0.1875 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.2180 INCHES NOMINAL IN
outer_ring_taper0.0800 PER FOOT IN INCHES NOMINAL
outer_ring_width0.1950 INCHES NOMINAL IN
special_featuresAXIAL INTERNAL FIT-UP TOLERANCE UNDER 1 LB LOAD LBS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
flange_outside_diameter0.6300 INCHES NOMINAL IN
NSN3110-00-293-8392
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSNR3HL1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
LOAD DIRECTION: RADIAL
•
RETAINER FABRICATION METHOD: PRESSED
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE SHAPE: STRAIGHT
•
OUTER RING TAPER: 0.0800 PER FOOT IN INCHES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.1875 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SPECIAL FEATURESAXIAL INTERNAL FIT-UP TOLERANCE UNDER 1 LB LOAD LBS
BORE SHAPESTRAIGHT
OUTER RING TAPER0.0800 PER FOOT IN INCHES NOMINAL
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
4310Interchangeable
interchangeable cross-reference
interchangeable
123-39Interchangeable
interchangeable cross-reference
interchangeable
254-102Interchangeable
interchangeable cross-reference
interchangeable
3981Interchangeable
interchangeable cross-reference
interchangeable
BT3981Interchangeable
interchangeable cross-reference
interchangeable
9230Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSNR3HL1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSNR3HL1?
SSNR3HL1 is a BEARING,BALL,ANNULAR.
What parts can replace SSNR3HL1?
There are 16 known substitutes for SSNR3HL1: 4310, 123-39, 254-102 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSNR3HL1?
SSNR3HL1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSNR3HL1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026