PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSMDR-3FA7P58L01K8
SSMDR-3FA7P58L01K8 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OVERALL A, bore_shape: STRAIGHT, bore_diameter: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, overall_width: 0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-089-4340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSMDR-3FA7P58L01K8
NSN: 3110-01-089-4340
FSC: 3110
CAGE: 50294 — NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440A OVERALL A
bore_shapeSTRAIGHT
bore_diameter0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
overall_width0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresSTABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C64.0 ROCKWELL HARDNESS RINGS AND BALLS
style_designatorSHOULDERED INNER RING, SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.7
NSN3110-01-089-4340
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SSMDR-3FA7P58L01K8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEST DATA DOCUMENT: 73030-763627-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
MATERIAL: STEEL COMP 440A OVERALL A
•
STYLE DESIGNATOR: SHOULDERED INNER RING, SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
BORE SHAPE: STRAIGHT
•
BORE DIAMETER: 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
TEST DATA DOCUMENT73030-763627-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
MATERIALSTEEL COMP 440A OVERALL A
STYLE DESIGNATORSHOULDERED INNER RING, SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
BORE SHAPESTRAIGHT
BORE DIAMETER0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONABEC NO.7
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODMACHINED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
PC83Interchangeable
interchangeable cross-reference
interchangeable
PN19Interchangeable
interchangeable cross-reference
interchangeable
1595507Interchangeable
interchangeable cross-reference
interchangeable
K-719Interchangeable
interchangeable cross-reference
interchangeable
NP541-18Interchangeable
interchangeable cross-reference
interchangeable
NP-541 PART 18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSMDR-3FA7P58L01K8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSMDR-3FA7P58L01K8?
SSMDR-3FA7P58L01K8 is a BEARING,BALL,ANNULAR.
What parts can replace SSMDR-3FA7P58L01K8?
There are 11 known substitutes for SSMDR-3FA7P58L01K8: PC83, PN19, 1595507 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSMDR-3FA7P58L01K8?
SSMDR-3FA7P58L01K8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-089-4340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSMDR-3FA7P58L01K8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026