PartsTable
Technical Data Sheet
Download PDF

SSL-HA-104 — PACKING MATERIAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SSL-HA-104: PACKING MATERIAL.

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include length: 34.062 INCHES NOMINAL IN, material: RUBBER SYNTHETIC, angle_height: 0.125 INCHES NOMINAL IN, special_features: 0.093 INCH RADIUS IN, fabrication_method: SOLID, cross-sectional_width: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-801-4095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSL-HA-104
NSN: 5330-00-801-4095
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
length34.062 INCHES NOMINAL IN
materialRUBBER SYNTHETIC
angle_height0.125 INCHES NOMINAL IN
special_features0.093 INCH RADIUS IN
fabrication_methodSOLID
cross-sectional_width0.312 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleDELTA
nondefinitive_spec/std_data50 GRADE AND 2 CLASS
NSN5330-00-801-4095
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SSL-HA-104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 34.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: DELTA
•
NONDEFINITIVE SPEC/STD DATA: 50 GRADE AND 2 CLASS
•
MATERIAL: RUBBER SYNTHETIC
•
FABRICATION METHOD: SOLID
TECHNICAL CHARACTERISTICS
LENGTH34.062 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.375 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.312 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEDELTA
NONDEFINITIVE SPEC/STD DATA50 GRADE AND 2 CLASS
SPECIAL FEATURES0.093 INCH RADIUS IN
MATERIALRUBBER SYNTHETIC
FABRICATION METHODSOLID
ANGLE HEIGHT0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
MIL-R-5847 CLASS2GRADE50Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SSL-HA-104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSL-HA-104?
SSL-HA-104 is a PACKING MATERIAL.
What parts can replace SSL-HA-104?
There is 1 known substitute for SSL-HA-104: MIL-R-5847 CLASS2GRADE50. Substitute compatibility should be verified for your specific system.
What is the NSN for SSL-HA-104?
SSL-HA-104 is cataloged in the U.S. Government catalog under NSN 5330-00-801-4095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSL-HA-104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.