PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SSCY10371
SSCY10371 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: CARBON OVERALL, case_style: SQUARE, seal_width: 0.490 INCHES NOMINAL IN, sealing_element_style: VERTICAL, end_item_identification: 2350-01-087-1095 M1A1 ARMD BATTLETANK, accommodated_shaft_diameter: 3.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-073-0022, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SSCY10371
NSN: 5330-01-073-0022
FSC: 5330
CAGE: 03673 — STEIN SEAL COMPANY (USA)
SPECIFICATIONS
materialCARBON OVERALL
case_styleSQUARE
seal_width0.490 INCHES NOMINAL IN
sealing_element_styleVERTICAL
end_item_identification2350-01-087-1095 M1A1 ARMD BATTLETANK
accommodated_shaft_diameter3.500 INCHES NOMINAL IN
NSN5330-01-073-0022
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SSCY10371 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN
•
SEAL WIDTH: 0.490 INCHES NOMINAL IN
•
MATERIAL: CARBON OVERALL
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER3.500 INCHES NOMINAL IN
END ITEM IDENTIFICATION2350-01-087-1095 M1A1 ARMD BATTLETANK
SEAL WIDTH0.490 INCHES NOMINAL IN
MATERIALCARBON OVERALL
CASE STYLESQUARE
SEALING ELEMENT STYLEVERTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
10371Interchangeable
interchangeable cross-reference
interchangeable
1949429Interchangeable
interchangeable cross-reference
interchangeable
79880Interchangeable
interchangeable cross-reference
interchangeable
SM-B-187288Interchangeable
interchangeable cross-reference
interchangeable
55972Interchangeable
interchangeable cross-reference
interchangeable
100371Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SSCY10371?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SSCY10371?
SSCY10371 is a SEAL,PLAIN ENCASED.
What parts can replace SSCY10371?
There are 24 known substitutes for SSCY10371: 10371, 1949429, 79880 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SSCY10371?
SSCY10371 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-073-0022. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SSCY10371

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026