PartsTable
Technical Data Sheet
Download PDF

SS882676-1 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SS882676-1: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include first_end_style: CHAMFERED, pin_overall_length: 0.590 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN, first_hole_diameter: 0.040 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN, pin_overall_diameter: 0.0940 INCHES MINIMUM AND 0.0950 INCHES MAXIMUM IN, first_end_taper_angle: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM, first_end_taper_length: 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-449-2940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS882676-1
NSN: 5315-00-449-2940
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 59915 — SERVICE & SALES INC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 316L OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 430 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 316 OR STEEL COMP 310 OVERALL
first_end_styleCHAMFERED
pin_overall_length0.590 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
first_hole_diameter0.040 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
pin_overall_diameter0.0940 INCHES MINIMUM AND 0.0950 INCHES MAXIMUM IN
first_end_taper_angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
first_end_taper_length0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationMIL-S-854 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
distance_from_centerline_of_hole_to_end_of_pin0.050 INCHES NOMINAL IN
NSN5315-00-449-2940
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS882676-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.040 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-854 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.0940 INCHES MINIMUM AND 0.0950 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.590 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.040 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-854 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.0940 INCHES MINIMUM AND 0.0950 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.590 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP E52100 OR STEEL COMP 316L OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 430 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 316 OR STEEL COMP 310 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
882676-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SS882676-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS882676-1?
SS882676-1 is a PIN,STRAIGHT,HEADLESS.
What parts can replace SS882676-1?
There is 1 known substitute for SS882676-1: 882676-1. Substitute compatibility should be verified for your specific system.
What is the NSN for SS882676-1?
SS882676-1 is cataloged in the U.S. Government catalog under NSN 5315-00-449-2940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS882676-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.