PartsTable / COMPONENT / SS834
SS834
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, overall_width: 1.120 INCHES NOMINAL IN, overall_height: 0.410 INCHES NOMINAL IN, operation_method: LEVER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-069-0711, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SS834
NSN: 5340-01-069-0711 FSC: 5340 CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
material STEEL COMP 302 OVERALL design_type LOOP ENGAGING hole_diameter 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN hole_quantity 4 overall_width 1.120 INCHES NOMINAL IN overall_height 0.410 INCHES NOMINAL IN operation_method LEVER style_designator LEVER surface_treatment PASSIVATE OVERALL engaging_surface_width 0.625 INCHES NOMINAL IN engaging_surface_thickness 0.062 INCHES NOMINAL IN material_document_and_classification AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL NSN 5340-01-069-0711
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: SS834
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE TREATMENT: PASSIVATE OVERALL
• SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
• MATERIAL: STEEL COMP 302 OVERALL
• HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
• ENGAGING SURFACE WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR LEVER SURFACE TREATMENT PASSIVATE OVERALL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL MATERIAL DOCUMENT AND CLASSIFICATION AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL MATERIAL STEEL COMP 302 OVERALL HOLE DIAMETER 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN OPERATION METHOD LEVER ENGAGING SURFACE WIDTH 0.625 INCHES NOMINAL IN OVERALL HEIGHT 0.410 INCHES NOMINAL IN HOLE QUANTITY 4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
210-3107 Interchangeable interchangeable cross-reference
interchangeable
27254 Interchangeable interchangeable cross-reference
interchangeable
450-2045 Interchangeable interchangeable cross-reference
interchangeable
C14422 Interchangeable interchangeable cross-reference
interchangeable
TC-1-1/2 Interchangeable interchangeable cross-reference
interchangeable
6403440 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy SS834?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS834?
SS834 is a CATCH,CLAMPING.
What parts can replace SS834?
There are 14 known substitutes for SS834: 210-3107, 27254, 450-2045 and 11 more. Substitute compatibility should be verified for your specific system.
Is SS834 still available?
SS834 is currently cancelled.