PartsTable
Technical Data Sheet
Download PDF

SS77506X1BA1 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SS77506X1BA1: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 16.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-278-6922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS77506X1BA1
NSN: 3110-00-278-6922
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width16.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresLUBRICANT CONTROLLED BY MFR
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialOIL
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-278-6922
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SS77506X1BA1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH16.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
SS77506XR1UReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS77506X1BA1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS77506X1BA1?
SS77506X1BA1 is a BEARING,BALL,ANNULAR.
What parts can replace SS77506X1BA1?
There is 1 known substitute for SS77506X1BA1: SS77506XR1U. Substitute compatibility should be verified for your specific system.
What is the NSN for SS77506X1BA1?
SS77506X1BA1 is cataloged in the U.S. Government catalog under NSN 3110-00-278-6922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS77506X1BA1