PartsTable
Technical Data Sheet
Download PDF

SS7231LWDG32 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SS7231LWDG32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, overall_width: 0.500 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 2.000 INCHES NOMINAL IN, end_item_identification: FLEET COMBAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-502-7320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS7231LWDG32
NSN: 5340-01-502-7320
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
overall_width0.500 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter2.000 INCHES NOMINAL IN
end_item_identificationFLEET COMBAT
distance_from_loop_center_to_tongue_end1.717 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.490 INCHES NOMINAL IN
NSN5340-01-502-7320
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS7231LWDG32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.717 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.490 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM OVERALL
•
LOOP INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.717 INCHES NOMINAL IN
END ITEM IDENTIFICATIONFLEET COMBAT
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.490 INCHES NOMINAL IN
MATERIALALUMINUM OVERALL
LOOP INSIDE DIAMETER2.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
SS7230WDC32Reference document
Same NSN cross-reference
Reference document — Secondary reference
SS7231WDC32Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy SS7231LWDG32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS7231LWDG32?
SS7231LWDG32 is a CLAMP,LOOP.
What parts can replace SS7231LWDG32?
There are 2 known substitutes for SS7231LWDG32: SS7230WDC32, SS7231WDC32. Substitute compatibility should be verified for your specific system.
What is the NSN for SS7231LWDG32?
SS7231LWDG32 is cataloged in the U.S. Government catalog under NSN 5340-01-502-7320. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS7231LWDG32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.