PartsTable
Technical Data Sheet
Download PDF

SS7000-2 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SS7000-2: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 1.480 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, length: 5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM IN, material: MAGNESIUM, body_thickness: 0.064 INCHES NOMINAL IN, surface_treatment: LACQUER, securing_device_type: TURNLOCK FASTENER. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-847-9365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS7000-2
NSN: 5340-00-847-9365
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
width1.480 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
length5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM IN
materialMAGNESIUM
body_thickness0.064 INCHES NOMINAL IN
surface_treatmentLACQUER
securing_device_typeTURNLOCK FASTENER
peripheral_shape_styleRECTANGLE, TWO HOLES
cross-sectional_shape_styleFLAT
distance_from_first_hole_centerline_to_end_along_width0.562 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length0.192 INCHES NOMINAL IN
distance_between_hole_centerline_and_first_hole_along_width0.938 INCHES NOMINAL IN
distance_between_hole_centerline_and_first_hole_along_length5.558 INCHES NOMINAL IN
NSN5340-00-847-9365
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS7000-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.562 INCHES NOMINAL IN
•
LENGTH: 5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH: 5.558 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: TURNLOCK FASTENER
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.192 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH: 0.938 INCHES NOMINAL IN
•
SURFACE TREATMENT: LACQUER
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.562 INCHES NOMINAL IN
LENGTH5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH5.558 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETURNLOCK FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.192 INCHES NOMINAL IN
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH0.938 INCHES NOMINAL IN
SURFACE TREATMENTLACQUER
PERIPHERAL SHAPE STYLERECTANGLE, TWO HOLES
WIDTH1.480 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS7000-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS7000-2?
SS7000-2 is a COVER,ACCESS.
What is the NSN for SS7000-2?
SS7000-2 is cataloged in the U.S. Government catalog under NSN 5340-00-847-9365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS7000-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.