PartsTable
Technical Data Sheet
Download PDF

SS7000-13A — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SS7000-13A: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM IN, length: 6.615 INCHES MINIMUM AND 6.625 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061, hole_diameter: 0.257 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN, body_thickness: 0.064 INCHES NOMINAL IN, surface_treatment: ANODIZE AND PRIMER ZINC CHROMATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-166-3852, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS7000-13A
NSN: 5340-00-166-3852
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
width5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM IN
length6.615 INCHES MINIMUM AND 6.625 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061
hole_diameter0.257 INCHES MINIMUM AND 0.259 INCHES MAXIMUM IN
body_thickness0.064 INCHES NOMINAL IN
surface_treatmentANODIZE AND PRIMER ZINC CHROMATE
securing_device_typeTURNLOCK FASTENER
peripheral_shape_styleRECTANGLE, FOUR HOLES
cross-sectional_shape_styleFLAT
mounting_opening_shape_styleUNTHREADED HOLE
distance_between_holes_along_width5.346 INCHES MAXIMUM IN
distance_between_holes_along_length4.495 INCHES MINIMUM AND 4.505 INCHES MAXIMUM IN
NSN5340-00-166-3852
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS7000-13A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
•
LENGTH: 6.615 INCHES MINIMUM AND 6.625 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-8585 MIL SPEC 2ND TREATMENT RESPONSE
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 4.495 INCHES MINIMUM AND 4.505 INCHES MAXIMUM IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 5.346 INCHES MAXIMUM IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
LENGTH6.615 INCHES MINIMUM AND 6.625 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-8585 MIL SPEC 2ND TREATMENT RESPONSE
DISTANCE BETWEEN HOLES ALONG LENGTH4.495 INCHES MINIMUM AND 4.505 INCHES MAXIMUM IN
DISTANCE BETWEEN HOLES ALONG WIDTH5.346 INCHES MAXIMUM IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETURNLOCK FASTENER
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.547 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy SS7000-13A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS7000-13A?
SS7000-13A is a COVER,ACCESS.
What is the NSN for SS7000-13A?
SS7000-13A is cataloged in the U.S. Government catalog under NSN 5340-00-166-3852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS7000-13A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.