SS52D0149X0388: SS52D0149X0388.
The SS52D0149X0388 is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 2024, construction: LAMINATED, outside_diameter: 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN, special_features: ALUMINUM ALLOY WASHERS AND SHIMS SHOULD NOT BE USED IN SEVERE LOADING CONDITIONS, style_designator: CIRCULAR, aperture_diameter: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-239-3436, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 2024 |
| construction | LAMINATED |
| outside_diameter | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN |
| special_features | ALUMINUM ALLOY WASHERS AND SHIMS SHOULD NOT BE USED IN SEVERE LOADING CONDITIONS |
| style_designator | CIRCULAR |
| aperture_diameter | 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN |
| features_provided | SEPARABLE |
| overall_thickness | 0.120 INCHES NOMINAL IN |
| lamination_quantity | 40 AND 1 |
| lamination_thickness | 0.003 INCHES NOMINAL AND 0.063 INCHES NOMINAL IN |
| nondefinitive_spec/std_data | 2 TYPE AND 2 CLASS AND 1 COMPOSITION |
| specification/standard_data | 81349-MIL-S-22498 GOVERNMENT SPECIFICATION AND 78286-SS52 MANUFACTURERS SPECIFICATION |
| NSN | 5365-01-239-3436 |
| OVERALL THICKNESS | 0.120 INCHES NOMINAL IN |
| STYLE DESIGNATOR | CIRCULAR |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1,TEMPER H19 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8,TEMPER H19 OR H39 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T3,TY,T81 OR T861 FED SPEC 3RD MATERIAL RESPONSE |
| OUTSIDE DIAMETER | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN |
| APERTURE DIAMETER | 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN |
| FEATURES PROVIDED | SEPARABLE |
| LAMINATION QUANTITY | 40 AND 1 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-S-22498 GOVERNMENT SPECIFICATION AND 78286-SS52 MANUFACTURERS SPECIFICATION |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 2 CLASS AND 1 COMPOSITION |
| SPECIAL FEATURES | ALUMINUM ALLOY WASHERS AND SHIMS SHOULD NOT BE USED IN SEVERE LOADING CONDITIONS |
No substitute or cross-reference records for this part.