PartsTable
Technical Data Sheet
Download PDF

SS5116-12-65 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

SS5116-12-65: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 FASTENER, head_style: DOUBLE HEXAGON W/HOLE, grip_length: 4.052 INCHES MINIMUM AND 4.072 INCHES MAXIMUM IN, head_height: 0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-338-9344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS5116-12-65
NSN: 5306-01-338-9344
FSC: 5306 — Bolts
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 FASTENER
head_styleDOUBLE HEXAGON W/HOLE
grip_length4.052 INCHES MINIMUM AND 4.072 INCHES MAXIMUM IN
head_height0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN
thread_length5.763 INCHES MINIMUM AND 5.793 INCHES MAXIMUM IN
fastener_length5.172 INCHES NOMINAL IN
special_featuresEXTENTION ON END OF THREAD 0.546 IN. MIN, 0.566 IN. MAX LG IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE FASTENER
width_between_flats0.797 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
NSN5306-01-338-9344
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: SS5116-12-65 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN
•
FASTENER LENGTH: 5.172 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
•
EXTENDED WASHER DIAMETER: 1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
•
THREAD LENGTH: 5.763 INCHES MINIMUM AND 5.793 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
HEAD HEIGHT0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN
FASTENER LENGTH5.172 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
EXTENDED WASHER DIAMETER1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
THREAD LENGTH5.763 INCHES MINIMUM AND 5.793 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.750 INCHES IN
HEAD STYLEDOUBLE HEXAGON W/HOLE
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
SS5116-12-065Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS5116-12-65?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS5116-12-65?
SS5116-12-65 is a BOLT,CLOSE TOLERANCE.
What parts can replace SS5116-12-65?
There is 1 known substitute for SS5116-12-65: SS5116-12-065. Substitute compatibility should be verified for your specific system.
What is the NSN for SS5116-12-65?
SS5116-12-65 is cataloged in the U.S. Government catalog under NSN 5306-01-338-9344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS5116-12-65

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.