PartsTable
Technical Data Sheet
Download PDF

SS5103D08 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SS5103D08: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.504 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, recess_diameter: 0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN, outside_diameter: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-306-3520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS5103D08
NSN: 5310-01-306-3520
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.504 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
recess_diameter0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
outside_diameter0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
style_designatorRECESSED
surface_treatmentANODIZE OR CHROMATE OVERALL
material_thickness0.080 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,H36 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5310-01-306-3520
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS5103D08 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,H36 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.080 INCHES NOMINAL IN
•
RECESS DIAMETER: 0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OR CHROMATE OVERALL
•
MATERIAL: ALUMINUM ALLOY 5052 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
STYLE DESIGNATORRECESSED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,H36 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8,H38 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
MATERIAL THICKNESS0.080 INCHES NOMINAL IN
RECESS DIAMETER0.604 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OR CHROMATE OVERALL
MATERIALALUMINUM ALLOY 5052 OVERALL
HOLE DIAMETER0.504 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
RECESS ANGLE90.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS5103D08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS5103D08?
SS5103D08 is a WASHER,RECESSED.
What is the NSN for SS5103D08?
SS5103D08 is cataloged in the U.S. Government catalog under NSN 5310-01-306-3520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS5103D08

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.