PartsTable
Technical Data Sheet
Download PDF

SS51034 — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SS51034: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, style_designator: ROUND CENTER HOLE, surface_treatment: CADMIUM, head_outside_diameter: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-725-6553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS51034
NSN: 5340-00-725-6553
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL
head_height0.062 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
prong_quantity6
style_designatorROUND CENTER HOLE
surface_treatmentCADMIUM
head_outside_diameter0.438 INCHES NOMINAL IN
prong_outside_diameter0.375 INCHES NOMINAL IN
hole_accommodation_diameter0.312 INCHES NOMINAL IN
material_accommodated_thickness0.064 INCHES NOMINAL IN
NSN5340-00-725-6553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS51034 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.064 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND CENTER HOLE
•
PRONG OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
HEAD OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.312 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.064 INCHES NOMINAL IN
STYLE DESIGNATORROUND CENTER HOLE
PRONG OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
HEAD OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
MATERIALSTEEL
PRONG QUANTITY6
SUBSTITUTES & CROSS-REFERENCES 5
130910003Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
6960-0023Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SS51034-K2920Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D2730LCSReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SS51034K2220Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy SS51034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS51034?
SS51034 is a BUTTON,PLUG.
What parts can replace SS51034?
There are 5 known substitutes for SS51034: 130910003, 6960-0023, SS51034-K2920 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS51034?
SS51034 is cataloged in the U.S. Government catalog under NSN 5340-00-725-6553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS51034

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.