SS5032-12-74: BOLT,MACHINE.
The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include chamfer_angle: 44.0 DEGREES MAXIMUM, hole_diameter: 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, special_features: FLIGHT SAFETY CRITICAL, nominal_thread_diameter: 0.750 INCHES IN, minimum_tensile_strength: 40 POUNDS PER SQUARE INCH LBS, thread_quantity_per_inch: 16. This part is cataloged in the U.S.
Government catalog under NSN 5306-01-168-5410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| chamfer_angle | 44.0 DEGREES MAXIMUM |
| hole_diameter | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| special_features | FLIGHT SAFETY CRITICAL |
| supplementary_features | BOLT MAY BE USED AT TEMPERATURES UP TO 450F; HOWEVER, STRENGTH REDUCTIONS DUE TO TEMPERATURE MUST BE CONSIDERED ON ALL APPLICATIONS OVER NORMAL AMBIENT |
| nominal_thread_diameter | 0.750 INCHES IN |
| minimum_tensile_strength | 40 POUNDS PER SQUARE INCH LBS |
| thread_quantity_per_inch | 16 |
| thread_series_designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| criticality_code_justification | FEAT |
| NSN | 5306-01-168-5410 |
| SPECIAL TEST FEATURES | THREAD SIZE: 0.750", 16 THREADS PER INCH, UNJF-3A, HOLE DIAMETER BEFORE TEST: .7495" MINIMUM AND .7505 MAXIMUM, MAXIMUM DIAMETER AFTER 100 CYCLES: .7525, REMOVAL FORCE LBS AFTER 100 CYCLES: 18, HOLE CHAMFER AFTER 100 CYCLES: .030" X 44 DEGREES, MAXIMUM BOLT INSERTION FORCE: 40LBS, BOLT REMOVAL FORCE: 40LBS MAXIMUM, 25LBS MINIMUM A |
| SUPPLEMENTARY FEATURES | BOLT MAY BE USED AT TEMPERATURES UP TO 450F; HOWEVER, STRENGTH REDUCTIONS DUE TO TEMPERATURE MUST BE CONSIDERED ON ALL APPLICATIONS OVER NORMAL AMBIENT |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| NOMINAL THREAD DIAMETER | 0.750 INCHES IN |
| SPECIAL FEATURES | FLIGHT SAFETY CRITICAL |
| MINIMUM TENSILE STRENGTH | 40 POUNDS PER SQUARE INCH LBS |
| CHAMFER ANGLE | 44.0 DEGREES MAXIMUM |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| HOLE DIAMETER | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.