PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS500PC6
SS500PC6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 9.219 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 8.375 INCHES NOMINAL IN, cross-sectional_thickness: 0.719 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-022-8834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS500PC6
NSN: 5330-01-022-8834
FSC: 5330
CAGE: 85013 — LAGUNA PUEBLO OF DBA LAGUNA TRIBAL COURTS (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter9.219 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter8.375 INCHES NOMINAL IN
cross-sectional_thickness0.719 INCHES NOMINAL IN
NSN5330-01-022-8834
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS500PC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.719 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OUTSIDE DIAMETER: 9.219 INCHES NOMINAL IN
•
APERTURE DIAMETER: 8.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.719 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
STYLE DESIGNATORCIRCULAR
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
OUTSIDE DIAMETER9.219 INCHES NOMINAL IN
APERTURE DIAMETER8.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
11008Interchangeable
interchangeable cross-reference
interchangeable
5905001585445Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-22/3Interchangeable
interchangeable cross-reference
interchangeable
770-2 3-4Interchangeable
interchangeable cross-reference
interchangeable
4-219-1Interchangeable
interchangeable cross-reference
interchangeable
4-219Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS500PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS500PC6?
SS500PC6 is a GASKET.
What parts can replace SS500PC6?
There are 22 known substitutes for SS500PC6: 11008, 5905001585445, MIL-PRF-22/3 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS500PC6?
SS500PC6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-022-8834. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS500PC6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026