PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS48184
SS48184 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.203 INCHES NOMINAL IN, style_designator: STANDARD, head_outside_diameter: 0.328 INCHES NOMINAL IN, prong_outside_diameter: 0.141 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-4529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS48184
NSN: 5340-00-290-4529
FSC: 5340
CAGE: 61864 — TRW ASSEMBLIES AND FASTENERS GROUP (USA)
SPECIFICATIONS
materialSTEEL COMP 1010
head_height0.062 INCHES NOMINAL IN
overall_height0.203 INCHES NOMINAL IN
prong_quantity4
style_designatorSTANDARD
head_outside_diameter0.328 INCHES NOMINAL IN
prong_outside_diameter0.141 INCHES NOMINAL IN
hole_accommodation_diameter0.125 INCHES NOMINAL IN
material_accommodated_thickness0.050 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
material_document_and_classificationSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-290-4529
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS48184 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1010
•
PRONG QUANTITY: 4
•
HOLE ACCOMMODATION DIAMETER: 0.125 INCHES NOMINAL IN
•
PRONG OUTSIDE DIAMETER: 0.141 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL ACCOMMODATED THICKNESS: 0.050 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1010
PRONG QUANTITY4
HOLE ACCOMMODATION DIAMETER0.125 INCHES NOMINAL IN
PRONG OUTSIDE DIAMETER0.141 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.203 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL ACCOMMODATED THICKNESS0.050 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
HEAD OUTSIDE DIAMETER0.328 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
48148Interchangeable
interchangeable cross-reference
interchangeable
41993Interchangeable
interchangeable cross-reference
interchangeable
157D1-1352Interchangeable
interchangeable cross-reference
interchangeable
6817Interchangeable
interchangeable cross-reference
interchangeable
22017533Interchangeable
interchangeable cross-reference
interchangeable
101064Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS48184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS48184?
SS48184 is a BUTTON,PLUG.
What parts can replace SS48184?
There are 8 known substitutes for SS48184: 48148, 41993, 157D1-1352 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS48184?
SS48184 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-4529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS48184

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026