PartsTable
Technical Data Sheet
Download PDF

SS125-2113411-6 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SS125-2113411-6: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include special_features: DO NOT DUPE TO NSN 5310-00-187-2429; THIS NSN IS FOR PEARL HARBOR USE ONLY; THIS IS A NON-STANDARD UNIT-OF-ISSUE. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-187-2429, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS125-2113411-6
NSN: 5310-00-187-2429
NIINs: 001872429, 014650798
FSC: 5310 — Nuts and Washers
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
special_featuresDO NOT DUPE TO NSN 5310-00-187-2429; THIS NSN IS FOR PEARL HARBOR USE ONLY; THIS IS A NON-STANDARD UNIT-OF-ISSUE
NSN5310-00-187-2429
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS125-2113411-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.873 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 155000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: NICKEL ALLOY A OVERALL
•
HOLE DIAMETER: 0.509 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.873 INCHES MAXIMUM IN
MATERIAL THICKNESS0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH155000 POUNDS PER SQUARE INCH LBS
MATERIALNICKEL ALLOY A OVERALL
HOLE DIAMETER0.509 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
6744239-9Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
004-003005-005Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35338-124Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2620-709X4PC134Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310001872429Reference document
Same NSN cross-reference
Reference document — Informative reference only
FF-W-84Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SS125-2113411-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS125-2113411-6?
SS125-2113411-6 is a WASHER,LOCK.
What parts can replace SS125-2113411-6?
There are 8 known substitutes for SS125-2113411-6: 6744239-9, 004-003005-005, MS35338-124 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS125-2113411-6?
SS125-2113411-6 is cataloged in the U.S. Government catalog under NSN 5310-00-187-2429. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS125-2113411-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.