PartsTable
Technical Data Sheet
Download PDF

SS11109-335-P — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SS11109-335-P: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT ONE SIDE, peripheral_diameter: 3.120 INCHES NOMINAL IN, center_hole_diameter: 2.750 INCHES NOMINAL IN, distance_between_ends: 0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-481-8900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS11109-335-P
NSN: 5330-00-481-8900
FSC: 5330 — Packing and Gasket Materials
CAGE: D7040 — TRELLEBORG SEALING SOLUTIONS GERMANY GMBH (DEU)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT ONE SIDE
peripheral_diameter3.120 INCHES NOMINAL IN
center_hole_diameter2.750 INCHES NOMINAL IN
distance_between_ends0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
cross-sectional_height0.102 INCHES NOMINAL IN
cross-sectional_thickness0.034 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-481-8900
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS11109-335-P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.034 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.102 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 3.120 INCHES NOMINAL IN
•
DISTANCE BETWEEN ENDS: 0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.034 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.102 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
PERIPHERAL DIAMETER3.120 INCHES NOMINAL IN
DISTANCE BETWEEN ENDS0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.750 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT ONE SIDE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 3
BP0090A335-PT00Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S11109-335Reference document
Same NSN cross-reference
Reference document — Secondary reference
04052333014410Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SS11109-335-P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS11109-335-P?
SS11109-335-P is a RETAINER,PACKING.
What parts can replace SS11109-335-P?
There are 3 known substitutes for SS11109-335-P: BP0090A335-PT00, S11109-335, 04052333014410. Substitute compatibility should be verified for your specific system.
What is the NSN for SS11109-335-P?
SS11109-335-P is cataloged in the U.S. Government catalog under NSN 5330-00-481-8900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS11109-335-P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.