PartsTable
Technical Data Sheet
Download PDF

SS10K201 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SS10K201: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK REVERSE KEYED, key_length: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, nut_length: 0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN, head_height: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-768-2494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS10K201
NSN: 5310-00-768-2494
FSC: 5310 — Nuts and Washers
CAGE: 03481 — BFGOODRICH CO THE AEROSPACE DIV ENGINEERED POLYMER PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 430 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK REVERSE KEYED
key_length0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
nut_length0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
head_height0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
nut_diameter0.246 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
thread_class3B
head_diameter0.386 INCHES MINIMUM AND 0.396 INCHES MAXIMUM IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
NSN5310-00-768-2494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS10K201 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
NUT LENGTH: 0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
HEAD COUNTERSINK ANGLE: 98.00 DEGREES MINIMUM AND 102.00 DEGREES MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT COUNTERSUNK REVERSE KEYED
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NUT LENGTH0.494 INCHES MINIMUM AND 0.504 INCHES MAXIMUM IN
THREAD SERIESUNF
HEAD COUNTERSINK ANGLE98.00 DEGREES MINIMUM AND 102.00 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SHANK END TYPEOPEN
HEAD STYLEFLAT COUNTERSUNK REVERSE KEYED
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.246 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 4
431DD5059Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1682128-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
719009-006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9171868Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS10K201?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS10K201?
SS10K201 is a NUT,PLAIN,BLIND RIVET.
What parts can replace SS10K201?
There are 4 known substitutes for SS10K201: 431DD5059, 1682128-2, 719009-006 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS10K201?
SS10K201 is cataloged in the U.S. Government catalog under NSN 5310-00-768-2494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS10K201