PartsTable
Technical Data Sheet
Download PDF

SS1083-305 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

SS1083-305: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, first_leg_angle: 93.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN, first_leg_length: 1.480 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-101-9868, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS1083-305
NSN: 5340-01-101-9868
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
first_leg_angle93.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
first_leg_length1.480 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
second_leg_styleCORNER RADIUS
second_leg_width0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.610 INCHES MINIMUM AND 1.670 INCHES MAXIMUM IN
surface_treatmentANODIZE
first_leg_thickness0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
second_leg_thickness0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NSN5340-01-101-9868
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS1083-305 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.310 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.310 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 93.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.430 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.310 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.310 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.098 INCHES NOMINAL IN
FIRST LEG ANGLE93.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG HOLE DIAMETER0.098 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.430 INCHES NOMINAL IN
SECOND LEG WIDTH0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
SECOND LEG LENGTH1.610 INCHES MINIMUM AND 1.670 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS1083-305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS1083-305?
SS1083-305 is a BRACKET,ANGLE.
What is the NSN for SS1083-305?
SS1083-305 is cataloged in the U.S. Government catalog under NSN 5340-01-101-9868. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS1083-305

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.