PartsTable
Technical Data Sheet
Download PDF

SS10-366 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

SS10-366: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN, nut_diameter: 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-046-5380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS10-366
NSN: 5310-01-046-5380
FSC: 5310 — Nuts and Washers
CAGE: 03481 — BFGOODRICH CO THE AEROSPACE DIV ENGINEERED POLYMER PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 430 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
nut_diameter0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class3B
head_diameter0.391 INCHES NOMINAL IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.190 INCHES IN
NSN5310-01-046-5380
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS10-366 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HEAD COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HEAD COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SHANK END TYPEOPEN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
MS27130-CR104Reference document
Same NSN cross-reference
Reference document — Secondary reference
1203019-364Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SS10-366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS10-366?
SS10-366 is a NUT,PLAIN,BLIND RIVET.
What parts can replace SS10-366?
There are 2 known substitutes for SS10-366: MS27130-CR104, 1203019-364. Substitute compatibility should be verified for your specific system.
What is the NSN for SS10-366?
SS10-366 is cataloged in the U.S. Government catalog under NSN 5310-01-046-5380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS10-366

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.