PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS1-16
SS1-16 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL, body_width: 0.265 INCHES MAXIMUM IN, body_height: 0.030 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, body_length: 0.265 INCHES MAXIMUM IN, first_end_style: CHAMFERED, features_provided: GATED OUTPUT AND MONOLITHIC AND POSITIVE OUTPUTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-834-5562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS1-16
NSN: 5315-00-834-5562
FSC: 5315
CAGE: 23266 — SECS INC (USA)
SPECIFICATIONS
materialSTEEL OR STEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL
body_width0.265 INCHES MAXIMUM IN
body_height0.030 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
body_length0.265 INCHES MAXIMUM IN
first_end_styleCHAMFERED
features_providedGATED OUTPUT AND MONOLITHIC AND POSITIVE OUTPUTS
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
surface_treatmentPASSIVATE OVERALL
inclosure_materialPLASTIC
pin_overall_length1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range+0.0 TO 75.0 CELSIUS DEGC
NSN5315-00-834-5562
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS1-16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OR MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL OR STEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL
•
FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
•
PIN OVERALL DIAMETER: 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC ALL MATERIAL RESPONSES OR MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL OR STEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL
FIRST END TAPER LENGTH0.030 INCHES NOMINAL IN
PIN OVERALL LENGTH1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
3M11AInterchangeable
interchangeable cross-reference
interchangeable
A3-11Interchangeable
interchangeable cross-reference
interchangeable
3M11Interchangeable
interchangeable cross-reference
interchangeable
HC6190SPCN73Interchangeable
interchangeable cross-reference
interchangeable
D2-8972PC72Interchangeable
interchangeable cross-reference
interchangeable
D2-9701PC55Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS1-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS1-16?
SS1-16 is a MICROCIRCUIT,DIGITAL.
What parts can replace SS1-16?
There are 20 known substitutes for SS1-16: 3M11A, A3-11, 3M11 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS1-16?
SS1-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-834-5562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS1-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026