PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS09080811
SS09080811 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, rising_pin: NOT INCLUDED, knuckle_type: FRICTION, pin_diameter: 0.250 INCHES NOMINAL IN, overall_length: 72.000 INCHES NOMINAL IN, knuckle_quantity: 26. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-237-8116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS09080811
NSN: 5340-00-237-8116
FSC: 5340
CAGE: 03007 — H. A. GUDEN COMPANY, INC. (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
rising_pinNOT INCLUDED
knuckle_typeFRICTION
pin_diameter0.250 INCHES NOMINAL IN
overall_length72.000 INCHES NOMINAL IN
knuckle_quantity26
performance_typeHEAVY DUTY
pin_removabilityREMOVABLE
style_designatorBUTT
material_thickness0.093 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
NSN5340-00-237-8116
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS09080811 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KNUCKLE QUANTITY: 26
•
RISING PIN: NOT INCLUDED
•
PIN CENTER TO BODY EDGE DISTANCE: 2.000 INCHES NOMINAL IN
•
KNUCKLE TYPE: FRICTION
•
MATERIAL THICKNESS: 0.093 INCHES NOMINAL IN
•
PIN REMOVABILITY: REMOVABLE
•
HINGE MOUNTING TYPE: FULL SURFACE
•
STYLE DESIGNATOR: BUTT
TECHNICAL CHARACTERISTICS (FLIS)
KNUCKLE QUANTITY26
RISING PINNOT INCLUDED
PIN CENTER TO BODY EDGE DISTANCE2.000 INCHES NOMINAL IN
KNUCKLE TYPEFRICTION
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
PIN REMOVABILITYREMOVABLE
HINGE MOUNTING TYPEFULL SURFACE
STYLE DESIGNATORBUTT
MATERIALUNABLE TO DECODE
PIN DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
808Upgraded Successor
successor cross-reference
successor
FFH116Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS09080811?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS09080811?
SS09080811 is a HINGE,BUTT.
What parts can replace SS09080811?
There are 2 known substitutes for SS09080811: 808, FFH116. Substitute compatibility should be verified for your specific system.
What is the NSN for SS09080811?
SS09080811 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-237-8116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS09080811

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026