PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS-242
SS-242 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include shelf: INCLUDED, leg_type: RIGID, material: STEEL CORROSION RESISTING TOP, overall_depth: 24.000 INCHES NOMINAL IN, overall_width: 24.000 INCHES NOMINAL IN, overall_height: 35.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-285-5677, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS-242
NSN: 5310-00-285-5677
FSC: 5310
CAGE: 29440 — W. M. BERG, INC. (USA)
SPECIFICATIONS
shelfINCLUDED
leg_typeRIGID
materialSTEEL CORROSION RESISTING TOP
overall_depth24.000 INCHES NOMINAL IN
overall_width24.000 INCHES NOMINAL IN
overall_height35.500 INCHES NOMINAL IN
shelf_locationUNDER WORKING SURFACE
special_features5 IN SWIVEL CASTERS W/RUBBER WHEELS, 2 W/BRAKES W
overhead_utensil_rackNOT INCLUDED
part_name_assigned_by_controlling_agencyWORK TABLE
NSN5310-00-285-5677
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SS-242 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THICKNESS: 0.016 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
OVERALL DIAMETER0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.016 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 302 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
S4-18UInterchangeable
interchangeable cross-reference
interchangeable
A6-18Interchangeable
interchangeable cross-reference
interchangeable
SS242Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS-242?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS-242?
SS-242 is a SHAFT,STRAIGHT.
What parts can replace SS-242?
There are 3 known substitutes for SS-242: S4-18U, A6-18, SS242. Substitute compatibility should be verified for your specific system.
Is SS-242 still available?
SS-242 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS-242

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026