PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SS-076040-60
SS-076040-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, knuckle_type: FRICTION, pin_diameter: 0.250 INCHES NOMINAL IN, overall_length: 60.000 INCHES NOMINAL IN, knuckle_quantity: 60, performance_type: NOT RATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-359-8972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SS-076040-60
NSN: 5340-01-359-8972
FSC: 5340
CAGE: 6B565 — MOORE PAUL CO (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
knuckle_typeFRICTION
pin_diameter0.250 INCHES NOMINAL IN
overall_length60.000 INCHES NOMINAL IN
knuckle_quantity60
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
material_thickness0.075 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
pin_center_to_body_edge_distance1.250 INCHES NOMINAL IN
NSN5340-01-359-8972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SS-076040-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.250 INCHES NOMINAL IN
•
PIN REMOVABILITY: NONREMOVABLE
•
PIN CENTER TO BODY EDGE DISTANCE: 1.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.075 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
MATERIAL: UNABLE TO DECODE
•
STYLE DESIGNATOR: BUTT
TECHNICAL CHARACTERISTICS (FLIS)
PIN DIAMETER0.250 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
PIN CENTER TO BODY EDGE DISTANCE1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.075 INCHES NOMINAL IN
REVERSIBLE FEATURENOT INCLUDED
OVERALL LENGTH60.000 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
STYLE DESIGNATORBUTT
HINGE MOUNTING TYPEFULL SURFACE
KNUCKLE QUANTITY60
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
A820Interchangeable
interchangeable cross-reference
interchangeable
808Interchangeable
interchangeable cross-reference
interchangeable
CGA-350-580Interchangeable
interchangeable cross-reference
interchangeable
17041Interchangeable
interchangeable cross-reference
interchangeable
R21005Interchangeable
interchangeable cross-reference
interchangeable
GP1092Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SS-076040-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SS-076040-60?
SS-076040-60 is a HINGE,BUTT.
What parts can replace SS-076040-60?
There are 10 known substitutes for SS-076040-60: A820, 808, CGA-350-580 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SS-076040-60?
SS-076040-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-359-8972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SS-076040-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026