PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SRS247158
SRS247158 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, shank_length: 0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN, overall_length: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, shank_diameter: 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, first_end_style: CHAMFERED, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-664-3135, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SRS247158
NSN: 5315-00-664-3135
FSC: 5315
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
shank_length0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
overall_length0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
shank_diameter0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
first_end_styleCHAMFERED
hardness_rating35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleSQUARE
style_designatorSHOULDER
shoulder_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
first_end_locationSHOULDER END
first_end_taper_angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NSN5315-00-664-3135
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SRS247158 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SHOULDER
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SECOND END STYLE: SQUARE
•
MATERIAL: STEEL COMP 410 OVERALL
•
FIRST END TAPER ANGLE: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
•
SHANK LENGTH: 0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSHOULDER
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SECOND END STYLESQUARE
MATERIALSTEEL COMP 410 OVERALL
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
SHANK LENGTH0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
SHOULDER DIAMETER0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
2470236G3Interchangeable
interchangeable cross-reference
interchangeable
8156B0440-3Interchangeable
interchangeable cross-reference
interchangeable
2372Interchangeable
interchangeable cross-reference
interchangeable
DISC FORM 650Interchangeable
interchangeable cross-reference
interchangeable
00648-4Interchangeable
interchangeable cross-reference
interchangeable
2935-07Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SRS247158?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SRS247158?
SRS247158 is a PIN,SHOULDER,HEADLESS.
What parts can replace SRS247158?
There are 10 known substitutes for SRS247158: 2470236G3, 8156B0440-3, 2372 and 7 more. Substitute compatibility should be verified for your specific system.
Is SRS247158 still available?
SRS247158 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SRS247158

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026