PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SRNH106-16
SRNH106-16 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP M50 INNER RING, bore_shape: STRAIGHT, bore_diameter: 30.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, inner_ring_width: 13.0 MILLIMETERS NOMINAL MM, locating_feature: NONLOCATING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-317-6304, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SRNH106-16
NSN: 3110-00-317-6304
FSC: 3110
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL COMP M50 INNER RING
bore_shapeSTRAIGHT
bore_diameter30.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
inner_ring_width13.0 MILLIMETERS NOMINAL MM
locating_featureNONLOCATING
outer_ring_width0.7850 INCHES NOMINAL IN
special_featuresANTI-ROTATION LUGS ON ONESIDE OF OUTER RING
internal_clearance0.0007 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
overall_outside_diameter2.1654 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.5
NSN3110-00-317-6304
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SRNH106-16 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.7850 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL COMP 4340 RETAINER
•
RETAINER FABRICATION METHOD: MACHINED
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.5
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING WIDTH0.7850 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
MATERIALSTEEL COMP 4340 RETAINER
MATERIALSTEEL COMP M50 OUTER RING
MATERIALSTEEL COMP M50 INNER RING
RETAINER FABRICATION METHODMACHINED
STANDARD TOLERANCE DESIGNATIONRBEC NO.5
MATERIALSTEEL COMP M50 ROLLER
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER2.1654 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
17-043Interchangeable
interchangeable cross-reference
interchangeable
DP5515Interchangeable
interchangeable cross-reference
interchangeable
18-79Interchangeable
IBM 283gb 15k SAS Disk
interchangeable
5RNH 106-W66Interchangeable
Same NIIN cross-reference
interchangeable
550036Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SRNH106-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SRNH106-16?
SRNH106-16 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace SRNH106-16?
There are 5 known substitutes for SRNH106-16: 17-043, DP5515, 18-79 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SRNH106-16?
SRNH106-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-317-6304. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SRNH106-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026