PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SRCBA1069
SRCBA1069 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.460 INCHES NOMINAL IN, overall_length: 3.870 INCHES NOMINAL IN, aperture_diameter: 1.813 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-794-6193, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SRCBA1069
NSN: 5330-00-794-6193
FSC: 5330
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.460 INCHES NOMINAL IN
overall_length3.870 INCHES NOMINAL IN
aperture_diameter1.813 INCHES NOMINAL IN
gage_ring_thickness0.080 INCHES NOMINAL IN
fsc_application_dataANTENNA-RECEIVER TRANSMITTER GROUP,MISSILE TRACKING
outside_corner_radius0.370 INCHES NOMINAL IN
maximum_pressure_rating25.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.110 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
NSN5330-00-794-6193
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SRCBA1069 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ANTENNA-RECEIVER TRANSMITTER GROUP,MISSILE TRACKING
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.370 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 25.0 POUNDS PER SQUARE INCH (PSI) LBS
•
GAGE RING THICKNESS: 0.080 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATAANTENNA-RECEIVER TRANSMITTER GROUP,MISSILE TRACKING
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.370 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING25.0 POUNDS PER SQUARE INCH (PSI) LBS
GAGE RING THICKNESS0.080 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
OVERALL WIDTH3.460 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.435 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.110 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
4907-1Interchangeable
interchangeable cross-reference
interchangeable
4907Interchangeable
interchangeable cross-reference
interchangeable
FAD12285AInterchangeable
interchangeable cross-reference
interchangeable
7611X1Interchangeable
interchangeable cross-reference
interchangeable
S1196896Interchangeable
interchangeable cross-reference
interchangeable
311SFQ6A7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SRCBA1069?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SRCBA1069?
SRCBA1069 is a GASKET.
What parts can replace SRCBA1069?
There are 11 known substitutes for SRCBA1069: 4907-1, 4907, FAD12285A and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SRCBA1069?
SRCBA1069 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-794-6193. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SRCBA1069

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026