PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SR824T
SR824T ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.1562 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-059-8384, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR824T
NSN: 3110-00-059-8384
FSC: 3110
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING INNER RING
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.1562 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.7500 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.5
NSN3110-00-059-8384
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR824T · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING INNER RING
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.1562 INCHES NOMINAL IN
BORE DIAMETER0.5000 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING INNER RING
MATERIALSTEEL CORROSION RESISTING BALL
MATERIALPLASTIC PHENOLIC RETAINER
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.5
MATERIALSTEEL CORROSION RESISTING OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AXH6277Interchangeable
interchangeable cross-reference
interchangeable
50142-5Interchangeable
interchangeable cross-reference
interchangeable
7799773Interchangeable
interchangeable cross-reference
interchangeable
5065Interchangeable
interchangeable cross-reference
interchangeable
23200020-27Interchangeable
interchangeable cross-reference
interchangeable
30-00959-0320Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SR824T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR824T?
SR824T is a BEARING,BALL,ANNULAR.
What parts can replace SR824T?
There are 8 known substitutes for SR824T: AXH6277, 50142-5, 7799773 and 5 more. Substitute compatibility should be verified for your specific system.
Is SR824T still available?
SR824T is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR824T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026