PartsTable
Technical Data Sheet
Download PDF

SR824PB — DIFFERENTIAL AND CARRIER ASSEMBL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SR824PB: DIFFERENTIAL AND CARRIER ASSEMBL.

DIFFERENTIAL AND CARRIER ASSEMBL. Key specifications include material: STEEL COMP 440C INNER RING, bore_diameter: 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_width: 0.3770 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-081-5506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR824PB
NSN: 3110-01-081-5506
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440C INNER RING
bore_diameter0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_width0.3770 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
shield_quantity2
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
bearing_preload_rating8.0 POUNDS NOMINAL LBS
overall_outside_diameter0.7498 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO. 5T
material_document_and_classificationUNABLE TO DECODE
NSN3110-01-081-5506
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR824PB · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING PRELOAD RATING: 8.0 POUNDS NOMINAL LBS
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 0.7498 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BEARING PRELOAD RATING8.0 POUNDS NOMINAL LBS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH0.3770 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.7498 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO. 5T
SUBSTITUTES & CROSS-REFERENCES 3
SR824PB31C9K811-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3TARD8-12-116Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3TAR8-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SR824PB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR824PB?
SR824PB is a DIFFERENTIAL AND CARRIER ASSEMBL.
What parts can replace SR824PB?
There are 3 known substitutes for SR824PB: SR824PB31C9K811-2, 3TARD8-12-116, 3TAR8-12. Substitute compatibility should be verified for your specific system.
What is the NSN for SR824PB?
SR824PB is cataloged in the U.S. Government catalog under NSN 3110-01-081-5506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR824PB