PartsTable
Technical Data Sheet
Download PDF

SR6FRHH7P811LGP20 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SR6FRHH7P811LGP20: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0620 INCHES NOMINAL IN, bore_diameter: 0.3750 INCHES NOMINAL IN, overall_width: 0.2812 INCHES NOMINAL IN, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-152-4706, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR6FRHH7P811LGP20
NSN: 3110-01-152-4706
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
flange_width0.0620 INCHES NOMINAL IN
bore_diameter0.3750 INCHES NOMINAL IN
overall_width0.2812 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresGREASE PLATE TO 5 PCT FULL OF SPECIFIED LUBRICANT
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
NSN3110-01-152-4706
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR6FRHH7P811LGP20 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.9690 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.9690 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.2812 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 2
343601Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
A2MMVFS3KDDFS160BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy SR6FRHH7P811LGP20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR6FRHH7P811LGP20?
SR6FRHH7P811LGP20 is a BEARING,BALL,ANNULAR.
What parts can replace SR6FRHH7P811LGP20?
There are 2 known substitutes for SR6FRHH7P811LGP20: 343601, A2MMVFS3KDDFS160B. Substitute compatibility should be verified for your specific system.
What is the NSN for SR6FRHH7P811LGP20?
SR6FRHH7P811LGP20 is cataloged in the U.S. Government catalog under NSN 3110-01-152-4706. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR6FRHH7P811LGP20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.