PartsTable
Technical Data Sheet

SR6-5D/262 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

SR6-5D/262: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 305 RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_width: 0.2178 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-135-4196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SR6-5D/262
NSN: 3110-01-135-4196
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83086 — NEW HAMPSHIRE BALL BEARINGS INC DIV HITECH DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 305 RETAINER
bore_shapeSTRAIGHT
bore_diameter0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_width0.2178 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_features25 PCT FULL OF SPECIFIED LUBRICANT
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter0.8748 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-01-135-4196
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: SR6-5D/262 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 0.8748 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.2178 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8748 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 4
181832-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
SR6-5DReference document
Same NSN cross-reference
Reference document — Secondary reference
1410-640Reference document
Same NSN cross-reference
Reference document — Secondary reference
10130551Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy SR6-5D/262?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SR6-5D/262?
SR6-5D/262 is a BEARING,BALL,ANNULAR.
What parts can replace SR6-5D/262?
There are 4 known substitutes for SR6-5D/262: 181832-1, SR6-5D, 1410-640 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for SR6-5D/262?
SR6-5D/262 is cataloged in the U.S. Government catalog under NSN 3110-01-135-4196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SR6-5D/262

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.